Web Operation Manual
71
General Figure 5-60
Configure the parameters. Step 2
Table 5-36 General setting parameters
Parameter Description
Device SN
The device serial number consisting of letters, numbers, underlines and
strikethroughs.
Device Code No. of the Camera. The device code cannot be overlaid with OSD information.
Language
Language of web browser page. You need to log in again when switching to another
language. Currently, only English is supported.
Video Standard
PAL and NTSC are available.
PAL: Much more common around the world, and can be found in most of
Western Europe, Australia, China, and elsewhere.
NTSC: Mostly limited to North America, parts of South America, Japan, the
Philippines and more.
Machine Group The group or entity that uses the Camera.
Machine
Address
The locations where snapshots were taken by the Camera.
Click Confirm. Step 3
5.7.1.2 Date & Time
You can configure date, time, time zone, and more for the Camera.
Select Setting > System > General Setup > Date&Time. Step 1
To Next Page
Loading...
Need help?
General
