Web Operation Manual
73
5.7.2.1 Account
Management Rules
The system manages both users and user groups. You can set up to 8 user groups and 18 users.
The factory settings cover two groups: User and admin.
Group name cannot be repeated, so is the username. Each user must be placed in a group, and
can only belong to one group. You can add or delete user group(s).
The username can be 31 characters at most, consisting of letters, numbers, "_", "@" and ".".
The name of the user group can be 15 characters at most, consisting of at least two of the
following types of characters: Letters, numbers, underlines, and hyphens.
The default username and password are both admin. There is one admin user by default which
has the highest authority.
We recommend giving fewer authorities to normal users than premium users.
User Management
You can view user information, add or delete user(s), change user password, assign user permissions,
restrict user login, and more.
Select Setting > System > Account > Account > Username. Step 1
Account Figure 5-62
Add a user. Step 2
1) Click Add User.
2) On the Add User page, configure user information including username, password,
group name, memo, and operation permissions (see Figure 5-64).
3) Set login restrictions (if necessary), and then the restricted IP address will be unable to
log in to the Camera during the restricted period. See Figure 5-65.
4) Click Save to save the settings.
To Next Page
Loading...
Need help?
General
