Web Operation Manual
81
HTTPS setting Figure 5-74
Configure the region, and IP address or domain name of the Camera, and then click Create. Step 3
The system prompts Operation succeeded! when it is done.
Click Install to install the certificate. Step 4
The system prompts Operation succeeded! after installation, and the information of the
HTTPS certificate will be displayed in Attribute.
Certificate installation Figure 5-75
Click Download, and then select the path to save the certificate. Step 5
Import the certificate to the browser. Step 6
The following steps use Internet Explorer as the example.
The method for importing certificates might differ depending on the browser.
1) Go to the save path of the certificate, and then double-click the certificate.
To Next Page
Loading...