ESS Series User’s Manual
Figure 3-19
3.4.1.1.5 Remove hotspare disk
In Figure 3-17, select a disk and then click remove hotspare disk button. Click save button to
delete it from the hotspare disk list and its status becomes idle.
3.4.1.1.6 Check and repair
Select disk(s) you want to detect from the idle disks list and then click Check button you can see
the following interface. See Figure 3-20.
The check process may take a while, please be patient. After the check process, you can fix the
disk if it has any error.
Figure 3-20
To Next Page
Loading...