Figure 2-5
Click Smart add, Cancel button or Next button, system goes to login interface. See Figure
2-6.
System consists of four accounts:
Username: admin. Password: admin. (administrator, local and network)
Username: 888888. Password: 888888. (administrator, local only)
Username: 666666. Password: 666666(Lower authority user who can only monitor,
playback, backup and etc.)
Username: default. Password: default (hidden user). Hidden user “default” is for
system interior use only and can’t be deleted. When there is no login user, hidden user
“default” automatically login. You can set some rights such as monitor for this user so
that you can view some channel view without login.
Figure 2-6
1) Input the User Name and Password
2) Click OK button, you can go to General interface. See Figure 2-7.
To Next Page
Loading...
