Figure 8-14
Select Function setting-Idle motion, the interface is as shown in Figure 8-15:
Figure 8-15
1. Enable the idle function
2. Select the time to activate the idle function
3. Select the type of idle function: preset, scan, tour, pattern
4. Select the number of idle function. e.g. preset 1
8.8 How to set Privacy Masking and call
In Figure 8-9, click to open the OSD menu, as it is shown in Figure 8-16.
Select Function setting-Next page-Privacy masking, the interface is as shown in Figure 8-16
To Next Page
Loading...
