Figure 3-19
4) Set min last time(Period), which means the stay time or disappear time of target when
triggering alarm.
5) Draw a detection area. As for object abandoned, it will trigger alarm when the abandoned
object surpasses the time set by users in the monitoring scene; As for object missing, it will
trigger alarm when the moved object surpasses the time set by users in the monitoring
scene.
6) Support alarm activation setup: record, alarm out, send email , PTZ activation, tour and
snapshot.
7) Target filter can set max size and min size, which means the max and min target it can
detect.
3.12. How to set the scene change of camera
From main menu->Setting->IVS, you can see tripwire, intrusion, object, scene change
for selection.
Function Description:
Scene Change is used to detect if the camera is covered or moved and other
abnormities of monitoring scene change.
The interface is as below.
To Next Page
Loading...
Need help?
General