Figure 2-18
1) Here you can modify the group created.
2) Here you can add the group.
2.9.1 How to Add/Modify Group
Click add group button, the interface is shown as below. See Figure 4-152.
Here you can input group name and then input some memo information if necessary.
There are many rights such as control panel, shut down, real-time monitor, playback,
record, record file backup, PTZ, user account, system information view, alarm input/output
setup, system setup, log view, clear log, upgrade system, control device and etc.
The modify group interface is similar to the Figure 2-19.
To Next Page
Loading...
Need help?
General