Dahua NVR4216-16P-4 User Manual

68
Figure 6-12
6.3.5 How to set alarm recording plan
We can find the menu on “SETTING”-“STORAGE”-“SCHEDULE”, as Figure 6-13 shows.
Figure 6-13
1)
Firstly we must enable Alarm.
2) Click it we can remove period.
3) Click it we can set period.
Click , we will get into timing setup interface, as Figure 6-14 shows.
①
②
③

Dahua NVR4216-16P-4 Specifications

General

Model	NVR4216-16P-4
Max Incoming Bandwidth	160 Mbps
Max Outgoing Bandwidth	80 Mbps
PoE Ports	16
Video Compression	H.265/H.264
Two-way Talk	Yes
OSD	Yes
Channel Input	16
Video Output	1 HDMI, 1 VGA
Network Interface	1 RJ-45 port (10/100/1000 Mbps)
Resolution	Up to 8MP
Multi-screen Display	1/4/9/16
Video Detection and Alarm	Motion detection, Tampering alarm
Alarm input	16
Relay Output	2 channel
eSATA	1 Port
USB	2 x USB 2.0
RS232	1 Port
Power Supply	100-240V AC, 50/60Hz
Operating Conditions	-10°C to +55°C
Storage Conditions	-20°C ~ 60°C
Recording Resolution	Up to 8MP
Operating Humidity	10% - 90%