You can also use P2P function on smart PSS.
Figure 10-7
1）Open devices interface, click on the manual add.
2）Choose register mode, input the SN, add device.
10.3 How to set DDNS
Device IP is not fixed if you use ADSL to login the network. The DDNS function allows you
to access the NVR via the registered domain name. Besides the general DDNS, the Quick
DDNS works with the device from the manufacturer so that it can add the extension
function.
DDNS web address：www.dahuaddns.com. After register and login, go to Equipment
where you can view and manage devices under your account. Click on device domain
name link to open corresponding Web interface.
Operation
Before use, the device must be connected to the Internet, please check if the connection
works properly. Please confirm Internet access port is open and default port to open is: 80,
554, 37777. Enable UPnP and PPPOE function of the device. For more information,
please refer to DDNS User’s Manual.
1）Right click and open the main menu of your device.
To Next Page
Loading...
Need help?
General