Figure 10-8
2）Click NETWORK and DDNS item.
3）Enable the function and choose a DDNS type.
Please note DDNS type includes: Dahua DDNS, NO-IP DDNS, CN99 DDNS, Dyndns
DDNS and Sysdns DDNS. All the DDNS can be valid at the same time, you can select as
your requirement.
There are two modes: Default domain name and customized domain name. Except default
domain name registration, you can also use customized domain name (You can input your
self-defined domain name.) After successful registration, you can use domain name to
login installed of the device IP.
User name: It is optional. You can input your commonly used email address.
Note
Do not register frequently. The interval between two registrations shall be more than 60
seconds. Too many registration requests may result in server attack.
System may take back the domain name that is idle for one year. You can get a
notification email before the cancel operation if your email address setup is OK.
10.4 How to use smart PSS to connect
After you install and set system parameters, you can refer to the steps listed below to add,
modify or delete a device manually or automatically.
To Next Page
Loading...
Need help?
General