Figure 2-4
Operation Steps are as below:
1) Input group name and then input some memo information if necessary
2) Check the corresponding rights for current group.
3) Click the Save Button to save the settings.
2.9.2 Add/Modify User
Click add user button, the interface is shown as in Figure 2-20.
Please input the user name, password, select the group it belongs to from the dropdown
list.
Then you can check the corresponding rights for current user
For convenient user management, usually we recommend the general user right is lower
than the admin account.
The modify user interface is similar to Figure 2-19.
To Next Page
Loading...
