Figure 9-17
a) Enable: Check the box to enable the Email Setting in SETTING-NETWORK
b) SMTP server and port: Input the SMTP server of sender mail box, e.g.,smtp.126.com or IP address of
the smtp server. Generally the port is 25.
c) User name and password: The username and password of the sender mailbox.
d) Receiver and Sender: Max support 3 receivers.
e) Subject: Please input email subject here. Support English character and Arabic number. Max 32-digit.
Enable Attachment, you will get snapshot of the alarm.Encrypt Type: Choose the correct one which
sender mailbox supports.
f) Interval: In this period time, DVR/NVR will recognize the alarms to one and just send one email.
g) Apply and OK to save the setting
Click the Test button, you can see the corresponding dialogue box to see the email connection is OK or not.If
“Test normal”, then Mail Setting is done. If not, please check all of the
9.5.2 Set Email function in EVENT
To Next Page
Loading...
