Dahua NVR4216-16P-4 User Manual

24
Figure 3-2
 Auto add
Operation Steps:
1) Click Device search button, you can view the searched IP addresses at the top pane of
the interface.
2) Double click an IP address or check one IP address and then click Add button, you can
add current device to the bottom pane of the interface. System supports batch add
function.
 Manual add
Operation Steps:
1) Click Manual Add button;
2) Select the manufacturer. Please choose Private if the NVR connect camera of Dahua.
3) Set IP address, Port, User name, Password.
4) Click Connect to test whether linked or not.
5) Click OK to save settings.

Dahua NVR4216-16P-4 Specifications

General

Brand	Dahua
Model	NVR4216-16P-4
Category	DVR
Language	English