101
PTZ function Figure 4-51
Go to Setting > Smart Thermal > Smart Plan. The Smart Plan interface is displayed. Step 1
Select 2 in Channel box and click Add Plan to select a preset. Step 2
(You might need to firstly click to disable the corresponding IVS function.) Click Step 3
to enable Call Detection. The icon turns into .
Click Save. Step 4
4.4.5.2 Configure Boat Detection
Configure tripwire and intrusion and the linked actions.
Select Setting > Smart Thermal > Boat Detection. Step 1
The Boat Detection interface is displayed.
Select a preset. Step 2
Add a detection rule. Step 3
To Next Page
Loading...