108
Setting Figure 4-57
2) Select a weekday and a period. Then you can define the period.
When you select the check box of All, you’re doing period settings towards all
weekdays.
3) Click Save. You return to the Link Schedule interface.
Click Save. Step 3
4.4.10 Configure Linked Measures
After you configure the Camera intelligent rules, you can set linked actions such as Relay-out, Send
Email, PTZ, Record and Snapshot to warn suspicious people & vehicles and inform you to take
measures.
Table 4-30 Linked action settings
Item Description
Period
If you want to define a specific period (4:00–23:59, for example) for a function
( smoking detection, for example) to work (this means perhaps you don’t
need to pay attention to the scene at 00:00–4:00), click Setting next to
Period to define every day in a week.
1. Next to Period, click Setting, and the period setting
displayed.
2. Configure period.
Method 1: Hold down and drag the left mouse button to select
working period you need.
Method 2: Select Setting > Event > Video Detection and click
Setting on the right side of Period. An interface is displayed. In this
interface, there are seven Setting
s altogether each of which
corresponds to a day in a week. Select a Setting you want and
there are six periods (period1-period6) below for you to pick up.
3. Click Save of working period.
Duration
The shortest time from placing an object in the detection area to an alarm is
triggered.
To Next Page
Loading...
Need help?
General