124
Burning warning Figure 4-67
Select the Enable check box. Step 2
Configure Sensitivity and Energy Threshold: Step 3
Sensitivity: Sensitivity for the camera to recognize whether the lenses are watching towards
the sun. The larger the value is, the easier the camera will be to recognize the sun.
Energy Threshold: The minimum energy value of the object watched by the lenses. Select
the energy threshold to filter the low-temperature objects and improve the identification
accuracy.
Click Save. Step 4
Temperature Measuring Settings 4.6
Temperature measuring is available on select models and the actual interface shall prevail.
4.6.1 Configuring Rules
Configure temperature measuring rules and when alarm conditions are met, an alarm will be
triggered.
4.6.1.1 Configuring Temperature Measuring Rules
Select Setting > Temperature > Rule > Parameter. Step 1
The Parameter interface is displayed. See Figure 4-68.
Parameter Figure 4-68
Configure temperature measuring rules and then parameters. Step 2
1) Click to add a rule.
To Next Page
Loading...
Need help?
General