58
Common setting Figure 4-10
When Profile Management is set as Full Time, you can select Day or Night as Always
Enable, and the surveillance system works under Always Enable.
Full time setting Figure 4-11
When Profile Management is set as Schedule, you can drag the slide block to set
certain time as Day or Night. For example, set 8:00–5:00 PM as day, and 0:00–8:00
and18:00–24:00 as night. System works under corresponding configuration in different
time.
Switching based on time Figure 4-12
Click Save. Step 3
4.1.2 Configuring Video Parameters
4.1.2.1 Configuring Video Streaming
Configure video stream parameters, including stream type, encode mode, resolution, frame rate, bit
stream control, bit stream, I frame interval, SVC, and watermark.
Select Setting > Camera > Video > Video. Step 1
The Video interface is displayed. See Figure 4-13.
The default bit stream value of different Cameras might vary, and the actual product shall
prevail.
To Next Page
Loading...
Need help?
General