Need help?Do you have a question about the Dahua TPC-BF1241-B3F4-S2 and is the answer not in the manual?
General| Thermal Camera | Yes |
|---|---|
| Pixel Interval | 12 μm |
| Focal Length (Thermal) | 3.5 mm |
| Aperture | F1.0 |
| Digital Zoom | 16x |
| Visible Light Camera | Yes |
| Focal Length (Visible) | 4 mm |
| Min. Illumination | 0.005 Lux @F1.6 |
| IR Distance | 50 m |
| Ethernet | RJ-45 (10/100 Base-T) |
| Temperature Range | -20°C to +150°C (-4°F to +302°F) |
| Focus | Fixed |
| Storage Temperature | -40°C to +70°C (-40°F to +158°F) |
| Humidity | ≤95% (non-condensing) |
| Max. Resolution (Thermal) | 256 × 192 |
| NETD | ≤50mk |
| Max. Resolution (Visible) | 2688 × 1520 |
| Video Compression | H.265; H.264 |
| Audio Compression | G.711a; G.711Mu; AAC |
| Protocols | IPv4; IPv6; HTTP; HTTPS; TCP; UDP; ARP; RTP; RTSP; SMTP; FTP; DHCP; DNS; DDNS; NTP; Multicast; ICMP |
| Power Supply | 12 VDC/PoE |
| Operating Temperature | -30 °C to +60 °C |
| Protection | IP67 |
| Frame Rate | 25 fps |
| Thermal Sensitivity | ≤50mk |
| Spectral Range | 8μm~14μm |
| Video Output | 1 channel |
General information about the manual and camera.
Information regarding camera ports and connections.
Categorized signal words with their defined meanings.
Details of manual revisions and their release times.
Introduction to the thermal hybrid camera's purpose and applications.
Lists the key features and capabilities of the camera.
Describes the operational functions of the camera.
Steps for initializing the camera and setting initial parameters.
Procedures for changing the camera's IP address.
Steps to access and log in to the camera's web interface.
Procedure to reset the camera's administrator password.
Viewing live video streams and performing basic operations.
Controls for Pan-Tilt-Zoom camera functions.
Configuration of camera components like lens, video, and audio.
Network settings for camera connectivity and communication.
Configuration of camera's external components like IR light and wiper.
Intelligent rules and thermal analysis functions for detection.
Configuration of event detection and alarm triggers.
Settings for temperature measurement and analysis.
Managing recording and snapshot storage configurations.
System configuration, user management, and safety settings.
Setting IP address, subnet mask, and default gateway.
Configuring network ports for communication.
Setting up PPPoE for internet connection.
Configuring Dynamic DNS for remote access.
Setting up email alerts for events.
Enabling UPnP for network discovery and access.
Configuring SNMP for network monitoring and management.
Setting up Bonjour for zero-configuration networking.
Configuring multicast IP for multiple viewers.
Setting up automatic camera registration.
Configuring 802.1X for network access control.
Configuring Quality of Service for network traffic management.
Settings for the camera's infrared illumination.
Configuration options for the camera wiper.
Fan operating mode settings.
Heater operating mode settings.
Setting up smart plans for intelligent rule functions.
Configuring intelligent video analysis rules for object detection.
Detecting and alerting on calling behavior.
Detecting smoking behavior within the surveillance area.
Detecting boats in the surveillance area.
Setting up fire detection and alarm triggers.
Tracking objects based on temperature.
Displaying thermal image within the visible image.
Scheduling linked actions based on time.
Setting up actions triggered by intelligent rules.
Setting up video-based event detection.
Setting up audio-based event detection.
Setting alarms based on temperature thresholds.
Configuring external alarm inputs.
Handling system abnormalities like SD card errors.
Setting up temperature measuring rules.
Global settings for temperature display and analysis.
Exporting heat map data for analysis.
Scheduling recording and snapshot activities.
Configuring storage paths for video and snapshots.
Settings for recording duration, pre-event record, and disk full strategy.
Basic camera information settings like name and language.
Managing user accounts and groups with permissions.
Adding ONVIF compatible users for interoperability.
Securing the camera with authentication and filters.
Recommended maintenance tasks for system upkeep.
Configuring automatic system maintenance tasks.
Importing and exporting system configurations and settings.
Process for upgrading the camera's firmware.
Viewing camera hardware and software version information.
Searching and managing system logs.
Viewing currently logged-in users.
Connecting the camera to an NVR for management.
Connecting the camera via SmartPSS client software.
Essential security actions for network equipment.
Optional security enhancements for network equipment.
To Next Page