153
HTTPS Figure 4-111
Install a certificate that has been signed. Step 2
1) Click Browse on the right side of Certificate Path bar to select a certificate you are to
upload.
2) Click Browse on the right side of Certificate Key Path bar to select the certificate
password you are to upload.
Click Upload. Step 3
Installation begins. After that, certificate property will be displayed in the Certificate
Installed bar of the HTTPS interface.
Click Delete near the Certificate Installed bar of the HTTPS interface to delete a certificate
installed.
Click Save to store the root certificate. Step 4
Install the root certificate. Step 5
3) Click you have saved.
The dialog box of Certificate is displayed. See Figure 4-112.
To Next Page
Loading...