152
Security warning Figure 4-109
7) Click Yes .
The system pops up a messaged that indicates the import was successful. See Click
Save to finish certificate importing.
Successful import prompt Figure 4-110
8) Click Save to finish installation of root certificate.
Enable HTTPS and a prompt that the Camera needs to be rebooted is displayed. Step 6
After your Camera reboots, type IP address of the Camera in your browser and access the
Camera through HTTPS protocol.
4.8.4.4.2 Installing Signed Certificate
Get a signed certificate and its password from the digital signature institute. And import the
certificate and its password to the Camera.
Select Setting > Network > HTTPS. Step 1
The HTTPS interface is displayed. See Figure 4-111.
To Next Page
Loading...