13
3 Daily Operation
Live 3.1
Cameras of different models might have different functions. The web operation manual is for thermal
hybrid cameras of all models. So your final interface shall prevail.
On the Live interface, you can do operations to the real-time surveillance images such as viewing,
taking snapshots and recording videos.
Image channel with a box around it is the one that has been chosen. All your operation is valid
only to this channel.
Double-click an image channel and the image channel is displayed in a full video display area.
Double-click the image channel again and the channel will be displayed in a full screen. Then,
right-click the full-screen image and the image returns to its previous state.
3.1.1 Introduction to Live Interface
Click the Live tab, and the Live interface is displayed. See Figure 3-1. In the live interface, there are
five function bars. See Table 3-1.
The live interface Figure 3-1
Table 3-1 Description of function bar
No. Name Description
1 System menu
Click each function tab in the system menu to go to the corresponding
interface.
To Next Page
Loading...
Need help?
General