158
Auto maintain Figure 5-2
Enable Auto Delete Old Files and select on your own the time gap of deleting the old files. Step 2
Ranges from 1 to 31 day(s).
Click Save. Step 3
Backing Up and Restoring 5.3
5.3.1 Importing and Exporting
Files that are exported do not contain presets. To import and export presets, see "3.2.1.4 Configuring
Preset Backup" and "3.2.2.4 Configuring Preset Backup."
Select Setting > System > Import/Export. Step 1
The Import/Export interface is displayed. See Figure 5-3.
Import/Export Figure 5-3
Import/Export files. Step 2
Click Export and paths of backing up files are displayed.
Click Import to import files that you have exported and backed up.
5.3.2 Default Settings
Be careful when implementing operations such as “restored to default” and “restored to factory
default”. The operations will result in data loss.
Select Setting > System > Default. Step 1
The Default interface is displayed. See Figure 5-4.
Default setting Figure 5-4
To Next Page
Loading...
Need help?
General