104
Send Email
Select the Send Email check box and an e-mail will be delivered to the
Camera user once an alarm is triggered.
Set your e-mail first before enabling the Send Email function. See "4.2.5
Configuring SMTP" for detailed operations.
PTZ
Select the check box of PTZ and select an item from None, Preset, Tour, and
Pattern in the Activation bar. Once an alarm is triggered, your PTZ will
execute the item you have selected in the Activation bar.
Set PTZ first before enabling this function. See "3.2 PTZ
operations.
Snapshot
Select the Snapshot check box to take a snapshot when there is an alarm.
To view and set storage path of snapshots, see "4.1.2.5 Configuring
Storage Path."
To make the snapshot function take effect, you need to firstly enable
motion-detection snapshots. See "4.7.1.2 Configuring Snapshot
detailed operations.
Click Save. Step 5
4.4.7 Configuring Hot Trace
You can enable Hot Trace to track spot with the highest temperature and spot with the lowest
temperature.
Select Setting > Smart Thermal > Hot Trace. Step 1
The Hot Trace interface is displayed. See Figure 4-53.
Hot trace Figure 4-53
Select the On check box. Step 2
Configure parameters of cold/hot spot tracking. See Table 4-29. Step 3
Table 4-29 Parameters of hot trace
Parameters Description
Color Mode
Select a color for cold and hot spots.
Auto: Select colors for the highest/
lowest temperature automatically
according to surveillance images.
Manual: Define colors for the highest/lowest temperature.
To Next Page
Loading...
Need help?
General