65
You can drag the "Picture Overlay" box in the video image with your mouse to adjust the
box’s location.
Click Save. Step 5
4.1.2.4 Configuring ROI
Select ROI in the image, and then the selected image would display with configured quality.
Select Setting > Camera > Video > ROI. Step 1
The ROI interface is displayed. See Figure 4-21.
ROI interface Figure 4-21
Select the Enable check box. Step 2
Hold the left mouse button to draw a ROI area on video images. You can also configure the Step 3
ROI’s display quality.
You can draw at most four ROI areas.
Click Remove All to delete all the area boxes; you can also just select one box, and
click Delete or right-click to delete it.
Click Save. Step 4
4.1.2.5 Configuring Storage Path
Configure storage paths covering Live Snapshot, Live Record, Playback Snapshot, Playback
Download, Video Clips, and Heat Map.
Select Setting > Camera > Video > Path. Step 1
The Path interface is displayed. See Figure 4-22.
To Next Page
Loading...
Need help?
General