137
Record control settings Figure 4-86
Configure record control parameters. See Table 4-46. Step 2
Table 4-46 Record control parameter description
Parameters Description
Pack Duration The duration of each file pack.
Pre-event Record
The time period for which the system records video before alarm, if the
value is 5, then the system records video for 5 seconds before alarm starts
and save it.
If the Record Mode is Off and the record activity has been linked with
alarm or motion detection, the system will still save the pre-event video.
Disk Full
The recording strategy when the disk is full.
Stop: The system stops recording when the disk is full.
Overwrite: T
he system overwrites the oldest files and keep
recording when the disk is full.
Record Mode
At the record mode, if you select Manual, the system starts video
recording; if you select Auto, the system records video as time period
scheduled; if you select Off, video recording will not start.
Record Stream Includes main stream and sub stream.
Click Save. Step 3
System Management 4.8
4.8.1 General Settings
4.8.1.1 Configuring General Information
Configure Camera name, language and video standard.
Select Setting > System > General > General. Step 1
The General interface is displayed. See Figure 4-87.
To Next Page
Loading...
Need help?
General