94
Table 4-26 Missing object parameters
Parameter Description
Period
Define a period during which the alarm settings are active.
1. Click Setting, and the period setting interface is displayed.
2. Configure period.
Method 1: Hold down and drag the left mouse button to select
working period you need.
Method 2: Select Setting > Event > Video Detection and click
Setting on the right side of Period. An interface is displayed. In this
interface, there are seven Settings
corresponds to a day in a week. Select a Setting you want and
there are six periods (period1-period6) below for you to pick.
3. Click Save of working period.
Duration
Time from when an object is taken away from the rule box to when linked
measures such as Audio Linkage, White Light and Relay-out are triggered.
Alarm Track
Select the check box and when the rule box detects a missing object, the
Camera will use thermal lens or visual lens to track it.
Track Time Time for the lens to track the object.
To set linked measures such as Audio Linkage and White Light when the rule box detects an Step 4
object, see "4.4.10 Configure Linked Measures."
Click Save. Step 5
4.4.2.3 Global Setup
Preparation
You have set smart plans of presets or channels. See "4.4.1 Configuring Smart Plan" for detailed
operations.
Procedure
Select Setting > Smart Thermal > IVS > Global Setup. Step 1
The Global Setup interface is displayed. See Figure 4-48.
To Next Page
Loading...
Need help?
General