45
Alarm Figure 3-42
Select an alarm type. Step 2
Select Prompt, and the system prompts and records alarm information as needed. Step 3
If you are not in the Alarm interface when alarm events you have subscribed are
triggered, there will be a displayed on the Alarm tab and the alarm information
will be recorded. Click the Alarm tab, and the sign disappears.
If you are at the “Alarm” interface when the selected alarm is triggered, there will be
detailed alarm information displayed at the right side of the interface.
Select the check box of Play Alarm Tone, and select audio file. Step 4
System would play the audio file you have selected, when alarm events you have subscribed
are triggered.
Click Remove all to remove all the alarm information.
To Next Page
Loading...
Need help?
General