Daihen OTC Almega AX Series User Manual

3.11 Welding conditions of WB-P350L/P400L/P500L ..................................... 3-38
3.11.1 About the welding condition parameters ............................................ 3-38
3.11.2 Points for setting the conditions ........................................................ 3-39
3.11.3 How the spatter adjustment parameter (APCS cond.) is used .......... 3-41
3.11.4 To adjust the pulse conditions ........................................................... 3-42
3.11.5 Waveform control with DC wave pulsed welding ............................... 3-44
3.11.6 About the welding constants .............................................................. 3-45
3.11.7 Settgins on the Welding Power Source Side ..................................... 3-46
3.12 Welding conditions of WB-W350/W400 .................................................. 3-48
3.12.1 About the welding condition parameters ........................................... 3-48
3.12.2 Points for setting the conditions ........................................................ 3-49
3.12.3 To adjust the pulse conditions ........................................................... 3-50
3.12.4 Waveform control with DC wave pulsed welding ............................... 3-52
3.12.5 About the welding constants ............................................................. 3-53
3.12.6 Settgins on the Welding Power Source Side ..................................... 3-54
3.13 Welding conditions of WB-A350P/A500P ............................................... 3-56
3.13.1 About the welding condition parameters ........................................... 3-56
3.13.2 Frequency during pulsed welding ..................................................... 3-57
3.13.3 Cleaning width .................................................................................. 3-57
3.13.4 AC-DC hybrid welding ....................................................................... 3-58
3.13.5 About the welding constants ............................................................. 3-59
3.13.6 Settgins on the Welding Power Source Side ..................................... 3-60

Daihen OTC Almega AX Series Specifications

General

Brand	Daihen
Model	OTC Almega AX Series
Category	Welding Accessories
Language	English