Daihen OTC Almega AX Series User Manual

1.3 Standard configuration
1.3 Standard configuration
This section describes the standard configuration for a system that performs robot welding using Welding
Interface (Digital). For details on the basic configuration for the AX series and the optional products, see the AX
series instruction manual "Controller Maintenance Manual".
1.3.1 Components of Robot controller/Welding power source Peripherals
Table 1.3.1 Configuration(other than TIG welder)
Ref.
No.
Model Type /
Parts Name Specifications
Part number
Welding Interface (Digital) L22440A00 Refer to Table 1.2.1
We
lding Interface
(Digital) board
L22440C00 Installed inside the robot controller
2171.25M
XP
Fuse (F1) (Parts number:
100-1742)
Rated 250V - 1.25A, UL, CSA, CCC certified product
(1)
Communication cable L22440E00 between Storage board and Welding Interface (Digital) board
Po
wer cable L22440J00 for power supply 24V
# 1 : WB-M350, WB-M400, WB-P350, WB-P400
WB-P350L
※
, WB-P400L
※
, WB-W350, WB-W400
MV4AP, MV4LAP, MV6, MV6L, MV16, MG3
2 : WB-M350, WB-M400, WB-P350, WB-P400
WB-P350L
※
, WB-P400L
※
, WB-W350, WB-W400
MH3, MS3
4 :
WB-M500/ WB-P500L
※
MV4AP, MV4LAP, MV6, MV6L, MV16, MG3
5 :
WB-M500 / WB-P500L
※
MH3, MS3
(2)
Cable and hose AXRB-4#**
6 : WB-M350L, WB-M400L, WB-P350L, WB-P400L
MV4AP, MV4LAP, MV6, MV6L, MV16, MG3
7 : WB-M350, WB-M400L, WB-P350L, WB-P400L L
MH3, MS3
WB-P500L
D：
MV4AP, MV4LAP, MV6, MV6L, MV16, MG3
WB-P500L
E：
MH3, MS3
05 : Cable length 5m
**
10 : Cable length 10m
15 : Cabl
e length 15m
05 : Cable length 5m
for Welbee Inverter
**
10 :
(3) Control cable 5 A2RB-52**
Cable length 10m
for Welbee Inverter
for Welbee Inverter
15 : Cabl
e length 15m
Vo
ltage detecting cable
(workpiece side)
L9509C00(10m), L9509D00(15m) for WB-M350L,WB-M400L,
WB-P350L, WB-P400L, WB-P500L
- L9509B00(5m)
※
: When used for aluminum welding.
1-8

Daihen OTC Almega AX Series Specifications

General

Brand	Daihen
Model	OTC Almega AX Series
Category	Welding Accessories
Language	English