Daihen OTC Almega AX Series User Manual

3.5 Writing the setup data
3-17
5
In the “Device (dest)”
folder selection field, select the folders in the order of
"Internal memory" → "WORK" → "A_APPLICATION", and then press [Enter].
>> The "A_APPLICATION" folder is selected.
POINT
In step 5, select "A_APPLICATION", not the "WELD" folder you selected in
step 4.
6
Press f12 <Execute>.
>>The setup data is written onto the robot controller.

Daihen OTC Almega AX Series Specifications

General

Brand	Daihen
Model	OTC Almega AX Series
Category	Welding Accessories
Language	English