Daihen OTC Almega AX Series User Manual

3.5 Writing the setup data
3-19
INFO.
If 'E' → 'n' → 'd' is not displayed, see "Chapter 4 Maintenance".
When these steps are performed, the setup file already written in this board is
backed up automatically to a USB memory.
If step2 is changed “Both No.2 and No.3 of a DIP switch are turned ON”, the
setup file can be restored from backup.

Daihen OTC Almega AX Series Specifications

General

Brand	Daihen
Model	OTC Almega AX Series
Category	Welding Accessories
Language	English