168
Magellan
TM
800i
If one of the above commands is received, the scanner will perform the steps indicated for the command. Addi-
tional host commands are available. Contact Tech Support for more details.
<C>: Contrast
‘C’ or ‘0’ (min) -
‘9’ (max)
0x42 or 0x30 -
0x39
Where ‘C’ = Scanner configuration Value.
Refer to the
“Image Capture” section on page 20 for more information on image capturing features and settings.
a.
Call Tech Support for information.
COMMAND ASCII HEX COMMENT
To Next Page
Loading...
