Datamax I-Class Maintenance Manual

Overview
1-1
1.0 Introduction
This manual, which primarily includes technical information relating to the electrical and mechanical
components, is intended for use by qualified service personnel in the maintenance and repair of I-
Class printers. For related information, refer to the following documents, available at
http://www.datamax-oneil.com/
• For operating information, reference the Operator’s Manual (part number 88-2241-01).
• For software information, reference the Class Series 2 Programmer’s Manual (part number 88-
2341-01).
Important Information:
The exclamation point inside an equilateral triangle is intended to alert the technician
to the presence of important operating, maintenance or servicing information. Always,
as with all electrical equipment, follow basic safety precautions to avoid personal injury
or printer damage.

Datamax I-Class Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Resolution	203 dpi, 300 dpi, or 600 dpi
Max Print Speed	10 inches per second (254 mm/s)
Interface	USB, Serial, Parallel
Media Types	Paper, Polyester, Polypropylene, Vinyl, Nylon