V0215, 2.1
2. Products, the product library
2.1. Introduction
2.1.1. The main view
In Products mode an overview is given of the program library on the control. In this mode a
product program can be selected (loaded). After that a program can be modified or executed.
Each item in the list consists of a thumbnail of the graphical product (for numerical programs a
symbol is shown), its Product ID, the Product Description, the Number of bends in the product,
what kind of product it is (Type) and the Date it was last used or modified. The Type indication
of the product shows following types of products:
In the Products mode existing, previously produced, products can
be selected to start production or for modification in order to make a
similar product. To start making a new product or program New
Product or New Program can be used from this mode.
To Next Page
Loading...
