2. Install the side cover.
3. Follow the procedure in after working inside your computer.
Removing the WLAN internal antenna
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the air shroud.
NOTE: For systems with 500W/1000W PSU only.
5. Remove the WLAN card.
About this task
The following images indicate the location of the WLAN antenna module and provide a visual representation of the removal
procedure.
Figure 28. Removing the WLAN internal antenna
Removing and installing Customer Replaceable Units (CRUs)
57
To Next Page
Loading...
