About this task
The following image indicates the location of the memory module and provides a visual representation of the removal procedure.
Figure 32. Removing the memory module
Steps
1. Pull the securing clips from both sides of the memory module until the memory module pops up.
2. Slide and remove the memory module from the memory-module slot.
Installing the memory module
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the memory module and provides a visual representation of the installation
procedure.
Removing and installing Customer Replaceable Units (CRUs)
61
To Next Page
Loading...
