About this task
The following images indicate the location of the graphics card and provide a visual representation of the removal procedure.
Figure 38. Removing the graphics card
Steps
1. Lift the pull tab to open the PCIe door.
2. Push and hold the securing tab on the graphics-card slot and lift the graphics card from the graphics-card slot.
3. Insert the blank filler.
4. Lift the pull tab to close the PCIe door.
Installing the graphics card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the graphics card and provide a visual representation of the installation procedure.
Removing and installing Customer Replaceable Units (CRUs)
67
To Next Page
Loading...
