Figure 35. Installing the GPU end holder
Steps
1. Position the GPU end holder to align it with the slots on the computer chassis.
2. Press the GPU end holder down until it secures into place.
3. Slide the latch to lock position on the GPU end holder.
Next steps
1. Install the side cover.
2. Follow the procedure in after working inside your computer.
Expansion card
Removing the PCIe external antenna
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
About this task
The following images indicate the location of the PCIe external antenna and provide a visual representation of the removal
procedure.
64
Removing and installing Customer Replaceable Units (CRUs)
To Next Page
Loading...
