Dell D30M - Installing the WLAN internal antenna

Steps
1. Remove the antenna cables from the routing guides on the chassis.
2. Unroute the antenna cables through the recess on the front of the chassis.
3. Remove the two (M3x3) screws that secure the WLAN antenna to the chassis.
4. Lift the WLAN antenna off the chassis.
Installing the WLAN internal antenna
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the WLAN internal antenna and provide a visual representation of the installation
procedure.
Figure 29. Installing the WLAN internal antenna
Steps
1. Route the antenna cables through the routing guides on the chassis.
58
Removing and installing Customer Replaceable Units (CRUs)