Figure 41. Removing the powered GPU
Figure 42. Removing the powered GPU
Steps
1. Slide the release latch on the graphics card holder and lift it out of the computer.
2. Disconnect the two power cables from the connector on the powered GPU and the power supply unit.
3. Lift the pull tab to open the PCIe door.
4. Push and hold the securing tab on the graphics-card slot and lift the powered GPU away from the graphics-card slot.
5. Insert the blank fillers.
6. Lift the pull tab to close the PCIe door.
70
Removing and installing Customer Replaceable Units (CRUs)
To Next Page
Loading...
