Dell Force10 TeraScale E Series - Page 1098

1098 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
• show ip pim interface
• show ip pim neighbor
• show ip pim rp
• show ip pim snooping interface
• show ip pim snooping neighbor
• show ip pim snooping tib
• show ip pim summary
• show ip pim tib
• show running-config pim
clear ip pim rp-mapping
c e s
Used by the bootstrap router (BSR) to remove all or particular Rendezvous Point (RP) Advertisement.
Syntax
clear ip pim rp-mapping rp-address
Parameters
Command Modes
EXEC Privilege
Command
History
clear ip pim tib
c e s
Clear PIM tree information from the PIM database.
Syntax
clear ip pim tib [group]
Parameters
Command Modes
EXEC Privilege
Command
History
rp-address
(OPTIONAL) Enter the RP address in dotted decimal format (A.B.C.D)
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on S-Series
group
(OPTIONAL) Enter the multicast group address in dotted decimal format (A.B.C.D)
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Introduced on S-Series