Dell PowerEdge C6220 II - Page 137

Using the System Setup Program | 137
Token
Setup option
Description
48A3
BMC LAN Port
Configuration
Sets BMC LAN Port to Shared-NIC.
48A4
BMC NIC IP
Source
Sets BMC LAN to get LAN IP from Static mode.
48A5
BMC NIC IP
Source
Sets BMC LAN to get LAN IP from DHCP mode.
48A6
IPv6 Mode
Disables IPv6 internet protocol support.
48A7
IPv6 Mode
Enables IPv6 internet protocol support.
48A8
IPv6 AutoConfig
Disables IPv6 auto configuration.
48A9
IPv6 AutoConfig
Enables IPv6 auto configuration.
48AA
Serial Port Mode
Console Redirection baud rate will be set to 3,8400 bits
per second.
48AB
Flow Control
Remote access flow controls by none.
48AC
Flow Control
Remote access flow controls by hardware.
48AD
Flow Control
Remote access flow controls by software.
48AE
Terminal Type
The BIOS console redirection, if enabled, operates in
VTUTF8 emulation model. See also tokens BFh, C0h,
and D7h.
48AF
VT-UTF8
Combo Key
Support
Disables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
48B0
VT-UTF8
Combo Key
Support
Enables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
48B1
Event logging
Disables BIOS to log system events to BMC, errors
include ECC/PCI/PCI-E/HT…etc.
48B2
Event logging
Enables BIOS to log system events to BMC, errors include
ECC/PCI/PCI-E/HT…etc.
48B3
NMI on Error
Disables BIOS to generate NMI when PCI-E
uncorrectable errors occur.