Dell PowerEdge C6220 II - Page 141

Using the System Setup Program | 141
Token
Setup option
Description
48F9
N/A
The RAID HDD14 is used for 1st device of PXE boot on
the next boot.
48FA
N/A
The RAID HDD15 is used for 1st device of PXE boot on
the next boot.
48FB
N/A
The RAID HDD16 is used for 1st device of PXE boot on
the next boot.
48FC
N/A
The HDD7 is used for 1st device of HDD boot on the
next boot.
48FD
N/A
The HDD8 is used for 1st device of HDD boot on the
next boot.
4900
PCI-E Slot1
This feature allows user to enable PCI-E Slot1 without
option ROM initialization.
4901
PCI-E Slot2
This feature allows user to enable PCI-E Slot2 without
option ROM initialization
4902
PCI-E Slot3
This feature allows user to enable PCI-E Slot3 without
option ROM initialization
4903
PCI-E Slot4
This feature allows user to enable PCI-E Slot4 without
option ROM initialization
4904
Mezzanine Slot
This feature allows user to enable Mezzanine Slot without
option ROM initialization.
4910
Chassis Level
Capping
This option allow user to disable chassis level capping
function.
4911
Chassis Level
Capping
Default, this option allow user to enable chassis level
capping function.
4912
Sled Level Policy
Default, set sled level policy to refer chassis level policy
when Emergency Throttling event trigger.
4913
Sled Level Policy
Set sled level policy as throttling when Emergency
Throttling event trigger.
4914
Sled Level Policy
Set sled level policy as throttling when Emergency
Throttling event trigger.
4915
Sled Level Policy
Set sled level policy as throttling when Emergency
Throttling event trigger.