142 | Using the System Setup Program
Default, set chassis level policy as throttling when
Emergency Throttling event trigger.
Set chassis level policy as power off when Emergency
Throttling event trigger.
Default, disables clock spread spectrum.
Enables clock spread spectrum.
Disable pci 64 bit decode
Auto config pci 64 bit decode
Disable Perfmon and DFX Devices
Enable Perfmon and DFX Devices
This feature prohibits the system downgrading below
BIOS 2.1.0, the field cannot be disabled once the field is
enabled.
This field is default disabled for the compliance of BIOS
updating. The token working with Password Jumper is
enabled only, Once disabled, the system BIOS could be
changed to any revision that contains a valid digital
signature.
Table 2-2. The IPMI Command Table
IPMI Device Global Commands
To Next Page
Loading...
