Dell PowerEdge MX760c - Installing a Drive Blank; Removing an E3.S Drive Blank

Figure 28. Removing drive blank
Next steps
1. Install a drive carrier or installing a drive blank.
Installing a drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
Steps
Insert the drive blank into the drive slot until the release button clicks into place.
Figure 29. Installing drive blank
Removing an E3.s drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
CAUTION: To maintain proper system cooling, drive blanks must be installed in all empty drive slots.
Installing and removing system components 67