Dell PowerEdge MX760c system
configurations and features
The PowerEdge MX760c system is a 2S single width compute sled that supports:
● Up to two 4
th
Generation Intel Xeon Scalable processors with up to 56 cores
● Up to 32 DDR5 DIMM slots
● Up to 4 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) drives
● Up to 6 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) drives
● Up to 8 x E3.sNVMe (SSD) drives
● MX7000 Gold Grade (Hardware version 2, Gen2) fans
NOTE: For more information about how to hot swap NVMe PCIe SSD U.2 device, see the Dell Express Flash NVMe
PCIe SSD User's Guide at https://www.dell.com/support > Browse all products > Infrastructure > Data Center
Infrastructure > Storage Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Select This
Product > Documentation > Manuals and Documents.
NOTE: All instances of SAS, SATA, NVMe drives are referred to as drives in this document, unless specified otherwise.
CAUTION: Do not install GPUs, network cards, or other PCIe devices on your system that are not validated
and tested by Dell. Damage caused by unauthorized and invalidated hardware installation will null and void the
system warranty.
Topics:
• System configurations - front view for PowerEdge MX760c
• System configurations - inside view for PowerEdge MX760c
• Locating the Express Service Code and Service Tag
• System information label
2
8 Dell PowerEdge MX760c system configurations and features
To Next Page
Loading...
