Serial port Configure RealPort mode using the Digi Navigator
Digi Connect EZ Mini User Guide
156
4. Click Properties. The Internet Protocol Version 4 (TCP/IPv4) Properties dialog appears.
5. Select Use the following IPaddress.
Note IMPORTANT:Make note of the current IPaddress entries for IPaddress, Subnet mask,
and Default gateway. You will need this information to complete the final step of the process.
6. Configure with the following details:
n IPaddress for PC: 192.168.210.2
n Subnet: 255.255.255.0
n Gateway: 192.168.210.1
To Next Page
Loading...
