Digital Projection E-Vision Laser 5000 XGA User Manual

Rev A December 2017
E-Vision Laser 5000 Series
High Brightness Digital Video Projector
4USER MANUAL
119-127A

Digital Projection E-Vision Laser 5000 XGA Specifications

General

Brightness	5000 ANSI Lumens
Resolution	1024 x 768 (XGA)
Light Source	Laser
Technology	DLP
Light Source Life	20, 000 hours
Projection Size	30 - 300 inches
Connectivity	HDMI, VGA
Lamp Life	20000 hours
Input Connectors	HDMI, VGA

Summary

Safety and Laser Precautions

Important Safety Information

Crucial safety guidelines and warnings for projector use.

Symbols Used

Explains warning symbols and styles used in the manual.

General Safety Information

Provides essential safety guidelines for projector operation.

Notice

States the intended user and advises recording model/serial numbers.

CLASS 3R LASER PRODUCT

Details the laser classification and necessary precautions.

Laser Parameters

Lists technical specifications related to the laser.

Location of Laser Aperture

Shows the projector's laser aperture location and warns against direct viewing.

Safety Interlock Switch

Explains the safety interlock switch for preventing laser leakage.

Power Safety

Guidelines for safe power usage and handling.

Sun Light Warning

Warns against using the projector in direct sunlight.

Installation and Basic Setup

Projector Installation Notice

Guidelines for proper projector placement and ventilation.

Verify the Installation Location

Instructions for ensuring a suitable and safe installation environment.

Cooling Notes

Provides guidelines for proper airflow and cooling for the projector.

Packing Checklist

Lists the items included in the projector package.

Views of Projector Parts

Identifies and describes the physical parts of the projector.

Front-right View

Identifies and describes the parts visible from the front-right of the projector.

Top View - Controls and Indicators

Details the projector's top view, including OSD buttons and indicator LEDs.

Rear View

Identifies and describes the connectors and ports on the rear of the projector.

Bottom View

Identifies and describes the mounting points and feet on the bottom of the projector.

Reference Drawings for Stand

Provides dimensional requirements for designing a projector stand, especially for portrait mode.

Adjusting the Projector Level

Instructions on how to adjust the projector's tilt using the adjuster feet.

Adjusting Projected Image Position Using Lens Shift

Explains how to use lens shift to adjust image position horizontally and vertically.

Lens Offset

Details the projector's fixed offset lens and available manual shift adjustments.

Operation and Controls

Main Features

Lists the key features and capabilities of the projector.

Remote Control

Describes the projector's remote control unit and its buttons.

Starting and Shutting Down the Projector

Provides instructions for powering the projector on and off.

Setting an Access Password (Security Lock)

Guides users on setting a password to prevent unauthorized projector use.

Adjusting Zoom, Focus, and Keystone

Provides instructions for adjusting image zoom, focus, and correcting keystone distortion.

Adjusting the Volume

Guides users on controlling the audio volume and mute function.

3D Setting

Configuration options for 3D display modes and formats.

OSD Menu Navigation and Settings

OSD Menu Controls

Explains how to navigate and use the projector's OSD menus.

Navigating the OSD

Describes how to use remote/projector buttons to navigate OSD menus.

Setting the OSD Language

Instructions for changing the language displayed in the OSD menu.

OSD Menu Overview

Provides a quick reference to OSD settings and their ranges.

Settings 1 Menu

Details the options available within the Settings 1 menu.

Image Menu

Explains how to access and adjust image-related settings like Display Mode and Brightness.

Computer Menu

Covers settings specific to PC input sources, like position and frequency.

Advanced Feature

Details advanced image settings such as Sharpness, Gamma, and Color Temperature.

White Balance

Explains how to adjust Red, Green, and Blue gain and offset for white balance.

Color Manager

Guides users through adjusting Hue, Saturation, and Gain for individual colors.

Audio

Details the audio settings available in the OSD menu.

Alignment

Covers image alignment settings such as aspect ratio, digital zoom, and keystone.

Keystone

Instructions for correcting vertical and horizontal keystone distortion.

4 Corner

Allows adjustment of the four corners of the projected image.

Advanced 1 Feature

Details settings in the Advanced 1 menu, including Language and Security Lock.

Advanced 2 Feature

Covers settings in the Advanced 2 menu, such as Test Pattern and Image Shift.

Settings 2 Menu

Details the options available within the Settings 2 menu.

Status

Displays information about the projector's current status, like active source and light hours.

Connectivity and Control

Advanced 1 Feature (from Settings 2)

Details settings in Advanced 1 menu, including Low Power Mode and Network.

Network

Configuration for network connectivity and remote control.

HDBaseT Control Function Table

A table detailing HDBaseT control functions and their projector modes.

Source Filter

Allows enabling or disabling specific input sources for the projector.

LAN_RJ45

Information regarding wired LAN connectivity via the RJ45 port.

Wired LAN Terminal Functionalities

Explains remote control and monitoring via wired LAN.

Supported External Devices

Lists external devices and controllers compatible with the projector's LAN port.

Projector Info

Displays detailed information about the projector's system status and configuration.

Crestron (Projector Control)

Describes how to control the projector using Crestron system interfaces.

Crestron (Setup Options)

Outlines the setup options for Crestron control integration.

Preparing Email Alerts

Guides on setting up email alerts for projector status notifications.

RS232 by Telnet Function

Explains how to use RS232 commands via Telnet for projector control.

Quick Start-Guide for “RS232 by TELNET”

Provides a concise guide to setting up RS232 control via Telnet.

Specifications and Compliance

Specifications

Lists detailed technical specifications for the projector models.

Projection Distance vs. Projection Size

Provides tables for projector distance and corresponding image sizes.

Timing Mode Table

Lists supported PC signal frequencies and resolutions.

Supported Frequencies for 3D Mode

Lists compatible signal frequencies specifically for 3D display modes.

Projector Dimensions

Shows the physical dimensions of the projector with diagrams.

REGULATORY COMPLIANCE

Information regarding FCC, Canada, and safety certifications.

Troubleshooting and Support

Common Problems and Solutions

Offers general troubleshooting tips and common solutions for projector issues.

Tips for Troubleshooting

Provides methods for efficiently diagnosing and resolving projector problems.

LED Error Messages

Lists LED error codes and their corresponding meanings for diagnostics.

Image Problems

Addresses common issues related to image display, such as no image or blurred image.

The Image is Reversed

Explains how to correct a reversed image display.

The Image is Streaked

Provides steps to troubleshoot streaked images.

The Image is Flat with No Contrast

Offers solutions for improving image contrast.

The Color of the Projected Image Does Not Match the Source Image

Guides on adjusting color temperature and gamma for accurate color reproduction.

Light Source Problems

Troubleshooting steps for when the projector shows no light output.

Remote Control Problems

Solutions for when the remote control fails to operate the projector.

Audio Problems

Troubleshooting steps for when no audio is produced by the projector.

Having the Projector Serviced

Instructions on what to do if projector issues cannot be resolved.