Dinstar UC2000 - Page 46

UC2000 User Manual
41
Copyright @ 2011-2015 Dinstar
Profile  FXO Interface:
Parameter
Explanation
Name
The name of the FXO profile
Tone Group
The national standard of dialing tone, busy tone and ring tone
Digit Timeout (s)
The timeout value for dialing a digit of a telephone number; the default is
4 seconds.
Dial Timeout (s)
The timeout value for dialing the first telephone number after off-hook;
the default is 10 seconds.
Ring Timeout (s)
The timeout value for the ringing of the phones through the FXO port
when there are incoming calls
No Answer Timeout (s)
The timeout value for ending calls which go out through FXO port